Site Information

 Loading... Please wait...

d&b J-Series 32x Turnkey Package


Other Details

Additional fee
Limited warranty
Available upon request

 Pre-owned  d&b audiotechnik J system -Turnkey Kit - System in excellent condition.

Additional d&b Packages available, For inquiries contact: – phone 713-459-5931










D80 Amp Package


J Flying Kit


Cable Package


Covers and carts


d&b audiotechnik's J-Series continues the company’s firmly established approach to the design and manufacture of superior German engineered loudspeaker systems. It is intended for use in large-scale sound reinforcement applications, providing incredibly quick and easily configurable array solutions even in the most arduous situations. Control of dispersion behaviour is a particular fixation at d&b, as is keeping the size and weight of systems to an absolute minimum; these are both areas in which the J-Series excels. It also embodies the d&b holistic approach to sound reinforcement solutions: integrating loudspeakers, electronics, mechanical deployment assemblies, remote control functions, transport solutions and setup design tools for precise calculation of array performance.


J8 loudspeaker

The J8 is a 3-way design housing 2 x 12" LF drivers, one horn loaded 10" MF driver and two 1.4" exit HF compression drivers with 3" voice coils mounted to a dedicated wave shaping device. The mechanical and acoustical design enables flown vertical columns of up to 24 loudspeakers to be suspended using vertical splay angles between them of 0° to 7° with a 1° resolution. The cylindrical wave segments produced couple coherently in the vertical plane. Due to the dipolar arrangement of the neodymium LF drivers the exceptional 80° horizontal constant directivity dispersion control is nominally maintained down to 250 Hz. The J8 is acoustically and mechanically compatible with the J12 loudspeaker. It can be used in columns of purely J8 loudspeakers or combined with J12s and / or with J-SUBs.

J8 data


Frequency response (–5 dB standard)

48 Hz - 17 kHz

Frequency response (–5 dB CUT mode)

85 Hz - 17 kHz

Max. sound pressure (1m, free field)1
with 30D
with D80


145 dB
145 dB

Cabinets per D80/30D


Loudspeaker data



Large format 3-way line array loudspeaker

Nominal impedance

6 Ω (LF) / 12 Ω (MHF)

Power handling capacity LF (RMS/peak 10 ms)

500/2000 W

Power handling capacity MHF (RMS/peak 10ms)

200/800 W

Nominal dispersion angle (horizontal)

80° 13

Splay angle settings

0 - 7° (1° increment)


2 x 12" driver / 1 x 10" driver
2 x 1.4" exit compression driver
passive crossover network


2 x NLT4 F/M
optional 2 x EP5 or 2 x NL8


Weight & Dimensions


Dimensions (H x W x D)

360 x 1100 x 570 mm
14.2 x 43.3 x 22.4"


60 kg
132 lb

J subwoofer

The J-SUB is an actively driven 2-way bass-reflex design housing three long excursion neodymium 18" drivers, two drivers face to the front and one driver to the rear. The cardioid dispersion pattern resulting from this approach avoids unwanted energy behind the system, which greatly reduces the reverberant field at low frequencies and provides the greatest accuracy of low frequency reproduction. J-SUB cabinets can be used to supplement J8 and J12 loudspeakers in various combinations, ground stacked or flown, either integrated on top of a J8 / J12 array or as a separate column. 

J-SUB data


Frequency response (–5 dB standard)

32 - 100 Hz

Frequency response (–5 dB INFRA mode)

32 - 70 Hz

Max. sound pressure (1m, free field)1
with 30D
with D80


138 dB SPL
139 dB SPL

Cabinets per D80/30D


Loudspeaker data



Large format flyable cardioid subwoofer

Nominal impedance

4 Ω (front) / 8 Ω (rear)

Power handling capacity (RMS/peak 10 ms) front

800/3200 W

Power handling capacity (RMS/peak 10 ms) rear

400/1600 W


3 x 18" driver


1 x NLT4 F
optional 1 x EP5 or 1 x NL8


J-Sub Dimensions, weight


Dimensions (H x W x D)

540 x 1100 x 9453 / 1063 mm
21.3 x 43.3 x 37.23 / 41.8"


106 kg
234 lb

D12 Amplifier

The 3 RU two channel D12 amplifier delivers medium to high power into low impedance loads between 4 and 16 ohms and is ideally suited for use in both mobile and installation environments. The D12 contains setups for all d&b loudspeakers and a linear mode. The signal delay capability enables user definable settings of up to 340 msec (=100 m/328.1 ft) to be applied independently to each channel. The same applies to the 4-band parametric equalizer, providing optional boost/cut or notch filtering. The D12 incorporates a digital rotary encoder and a LCD display to configure the amplifier.

D12 Data



Mains power switch


Digital rotary encoder


Liquid Crystal Display (LCD)/120 x 32 pixel


LED indicators

Digital Signal Processing



4-band PEQ/Notch

Latency analog and digital inputs

0.3 msec.

Delay setting

0.3 - 340 msec. with 0.1 msec. detents


Current d&b loudspeakers and linear mode

Function switches

d&b loudspeaker specific circuits

Frequency generator

Pink noise or Sine wave

Sampling rate

96 kHz/27 Bit ADC/24 Bit DAC





3 pin XLR female


3 pin XLR male


3 pin XLR female AES 3


3 pin XLR male

Sampling rate

48 kHz/96 kHz


optional EP5/NL8


2 x RJ 45 parallel, CAN-Bus


SUB-D9 female

Mains connector

PowerCON® 1

Data (linear setting with subsonic filter)

Rated output power

(THD + N < 0.5%, both channels driven)
CF = 6 dB at 4 / 8 ohms
CF = 12 dB at 4 / 8 ohms


2 x 1200 / 750 W
2 x 1600 / 800 W

S/N ratio (unweighted, RMS)

> 110 dBr


Power supply


Autosensing switch mode power supply for

115/230 V, 50 - 60 Hz
optional 100/200 V, 50 - 60 Hz

Dimensions & Weight


Height x width x depth

3 RU x 19” x 353 mm/13.9”


13 kg/28.7 lb


Product Videos

d&b audiotechnik - V-Series 10:36

PLASA Awards for Innovation 2012 - Presentation to Judging Panel by Steve Jones

  • d&b audiotechn...
    PLASA Awards for Innovation 2012 - Presentation to Judging Pan...
  • Instalacioin d...
    Presentación de la instalación D&B audiotechnik serie V
  • Y-Series. Y7P,...
    With the epitome of line array loudspeakers and a new generati...
  • Armin van Buur...
    Sólo d&b audiotechnik podía sonorizar el impresionante concie...
  • Prezentacja sy...
    Pokaz wielkoformatowego systemu nagłośnieniowego firmy d&b aud...
  • d&b D20 Amplif...
    Step by step d&B D20 Amplifier with T10 Passive PA speakers se...
  • d&b 24S, 24S-D...
    Hechos para colocarse y olvidarse de ellos: los nuevos 24S, 24...
  • D&B First Time...
    D&B Training Session at Ramoji Film City
  • Look inside D&...
    Ever wonder what is inside a world class pro monitor wedge? Ta...

Warranty Information

Thank you for your interest in the products and services of Tourpro, Inc. This Limited Warranty applies to physical goods, and only for physical goods, purchased from TourPro, Inc. (the "Physical Goods").

TourPro, Inc. ,,, and offers a 48 hour period, upon receipt, to inspect items for incorrect shipments or defective items. If an item is found to be defective, please contact TourPro, Inc. to resolve to issue as soon as possible. If, during the 72 hour period, an item is found to be defective, TourPro, Inc. will offer to ship replacement parts/items for product repair.

This Limited Warranty extends to the original purchaser only and is not transferable.

The all products listed for warranty, other than the 48 hour warranty listed above, may only be returned, repaired or replaced due to defect through the manufacturer directly, as per the manufacturer's policies.

What does this limited warranty cover?

This Limited Warranty covers any defects in material or workmanship under normal use during the Warranty Period.

What will we do to correct problems?

TourPro, Inc. will:

Tourpro, Inc., and offers a 72 hour period, upon receipt, to inspect items for incorrect shipments or defective items. If an item is found to be defective, please contact TourPro, Inc. to resolve to issue as soon as possible. If, during the 72 hour period, an item is found to be defective, TourPro, Inc. will offer to ship items for product repair.

How long does the coverage last?

The Warranty Period for Physical Goods purchased from TourPro, Inc. is 48 hours from the date of product delivery.

A replacement Physical Good or part assumes the remaining warranty of the original Physical Good or 2 Days from the date of replacement or repair, whichever is longer.

What does this limited warranty not cover?

This Limited Warranty does not cover any problem that is caused by:

Shipping damage; all shipping damage issues will be handled by company, or companies, who shipped the product as agreed to by TourPro, Inc. and/or customer of product.

Conditions, malfunctions or damage not resulting from defects in material or workmanship Conditions, malfunctions or damage resulting from negligence, improper maintenance or modification- Damaged or destroyed by natural causes including but not limited to lightning, flood, or other natural disaster- Theft or loss of the Physical Goods This Limited Warranty does not cover any shipping charges, handling charges, gift wrap fees or taxes. You are responsible for and must prepay all shipping charges.

This Limited Warranty is void if the Physical Goods are returned with removed, damaged or tampered labels or any alterations.

What do you have to do?

To obtain warranty service, you must obtain a Return Merchant Authorization (RMA) number and instructions on how to return a product by contacting us.

Deliver the Physical Goods, in either its original packaging, including any accessories or documents that shipped with the Physical Goods to the address specified by TourPro, Inc. .

To obtain the Return Merchant Authorization (RMA) number, you can contact us by any of the following contact methods:

By email:

Other Details

Additional fee
Limited warranty
Available upon request

Find Similar Products by Category

Click the button below to add the d&b J-Series 32x Turnkey Package to your wish list.